USA Office: +1 863-949-0942
Availability time Mon - Tue - Wed: 08:00 - 16:00 Thu: 09:00 - 12:00
Eastern Time (ET)
Eastern Time (ET)
Adress 300 S Acuff Road - Lake Wales, FL 33859 USA
Ercules 10
Ercules 10 Tracked Forklift
The Ercules 10 Tracked forklift is the smallest model in the range of pallet jacks.
The forklift system supports pallet loads weighing up to 1000kg, and the powerful rubber tracks let you get around under any terrain conditions, even when faced with diagonal slopes up to 20°.
The extendable carriage with outer measurements from 1200 to 1760 (mm) makes it less cumbersome during transport and in certain work conditions.
Comes with 11.7Hp Honda 398cm3 gasoline or 10Hp Yanmar 435cm3 diesel motor, both with electric start, that guarantee outstanding performance and reliability with less consumption.
Why Choose Ercules 10
TrackedMachines forklifts as well as all the other machines are entirely designed and made at Tracked Machines, Italy, using avant-garde technology from laser cutting of steel sheets to certified welding, and from tests and commissioning to after-sales service.
The vehicles offer outstanding performance, reliability, resistance, and long product life also thanks to the use of Strenx high-strength steel with high-quality powder coating.
- Ercules 10 lets you transport up to 1000 kg on any type of terrain like: muddy and slippery ground, sand, and snow, and gives you stability even on an incline.
- The option to close or extend the carriage further improves the stability and maneuverability of the vehicle.
- Easily transportable even with a small truck or van.
| MODEL: ERCULES 10 B | METRIC SYSTEM | IMPERIAL SYSTEM |
| Engine | Honda GX390 | Honda GX390 |
| Displacement | 389 (cm3) | 13,15 ounce US (oz) |
| Engine power | 8,7KW @3600rpm | 11,7Hp @3600rpm |
| Starting system | Electric | Electric |
| Fuel | Gasoline | Gasoline |
| Fuel tank capacity | 6,1 (litre) | 1,6 (gal) |
| Fuel consumption | 3,5 (litre/h) @3600 rpm cont. | 0,9 (gal/h) @3600 rpm cont. |
| Oil pan | 1,1 (litre) | 0,29 (gal) |
| HYDRAULIC INSTALLATION | ||
| Distributor | Mechanical lever | Mechanical lever |
| N° translation levers | 2 | 2 |
| N° standard levers | 3 | 3 |
| Max pressure system | 180 (bar) | 2610,68 (psi) |
| GEAR MOTOR | ||
| Type | Bonfiglioli 700-2C2 K | Bonfiglioli 700-2C2 K |
| N° of speed | 2 | 2 |
| RUBBER TRACK | ||
| Dimensions | 230x72x50 mm | 9,05x2,83x1,97 inches |
| Tensioning | Grease | Grease |
| Idler wheel n° | 4 | 4 |
| PERFORMANCE | ||
| Load capacity | 1000Kg | 2204,62 lbs |
| Speed 1/2 | 1,7/3,2 Km/h | 1,06/2,0 mph |
| Machine weight | 1100 Kg * | 2425,08 lbs * |
| Operator position | on board | on board |
| Max slope | 20° | 20° |
| FORKS | ||
| Dimensions | 100x35x1100 mm | 3,94x1,38x43,31 inches |
| Type | FEM2 | FEM2 |
| OPTIONAL | ||
| White rubber track | Yes | |
| Side shifter | Configuration to be evaluated with technical department | Configuration to be evaluated with technical department |
| Hour meter | Yes | Yes |
| Telescopic forks (opened/closed) | No | No |
| Towing hook | Yes | Yes |
| Additional hydraulic services | Configuration to be evaluated with technical department | Configuration to be evaluated with technical department |
*Note: the dimensions and weight of the machine depend on the required configuration.