USA Office: +1 863-949-0942
CALL AVAILABLE TIME:
Mon-Fri: 8:00 - 11:00
USA Office: +1 863-949-0942
Availability time Mon - Tue - Wed: 08:00 - 16:00 Thu: 09:00 - 12:00
Eastern Time (ET)
Adress 300 S Acuff Road - Lake Wales, FL 33859 USA

Ercules 20

Ercules 20 Tracked Forklift

Tracked forklift for lifting up to 2000 kg

The Ercules 20 Tracked forklift is the largest of the Ercules models made by Tracked Machines.
It carries loads up to 2000kg while still keeping—like all the other models—small sized rubber tracks ideal for all terrains and slopes up to 20°.
The vehicle is mounted on an undercarriage with extendable carriage and allows you to change its range of movement, so that you can load and unload working in areas with the narrowest entrances and effortlessly get around on soft or uneven ground like gravel, sand, mud, and snow.
Comes with 35 hp B&S Vanguard 35 – 993cm3 gasoline engine selected for its outstanding performance and reliability with less consumption.

Why Choose Ercules 20

Built in Verona, Italy, according to the same quality standards as the minidumpers and the vehicles from the Cut Green line.
Just like the other machines, Ercules 20 employs high-performance tracked chassis, designed to last under tough conditions.
The vehicles offer outstanding performance, reliability, resistance, and long product life also thanks to the use of Strenx high-strength steel with high-quality powder coating.

  • Ercules 20 lets you transport up to 2000kg on any type of terrain like: muddy and slippery ground, sand, and snow, and gives you stability even on an incline.
  • The option to close or extend the carriage further improves the stability and maneuverability of the vehicle.
MODEL:
ERCULES 20 B
METRIC SYSTEMIMPERIAL SYSTEM
EngineB&S Vanguard 35B&S Vanguard 35
Displacement993 (cm3)33,58 ounce US (oz)
Engine power26,11KW @3600rpm35Hp @3600rpm
Starting systemElectricElectric
FuelGasolineGasoline
Fuel tank capacity21 (litre)5,55 (gal)
Fuel consumption10,1 (litre/h) @3600 rpm cont.2,67 (gal/h) @3600 rpm cont.
Oil pan2,3 (litre)0,61 (gal)
HYDRAULIC INSTALLATION
DistributorMechanical leverMechanical lever
N° translation levers22
N° standard levers33
Max pressure system180 (bar)2610,68 (psi)
GEAR MOTOR
TypeBonfiglioli 701-2C2 KBonfiglioli 701-2C2 K
N° of speed22
RUBBER TRACK
Dimensions230x72x57 mm9,05x2,83x2,24 inches
TensioningGreaseGrease
Idler wheel n°44
PERFORMANCE
Load capacity2000 Kg4409,25 lbs
Speed 1/21,7/3,2 Km/h1,06/2,0 mph
Machine weight1650 Kg *3637,63 lbs *
Operator positionon boardon board
Max slope20°20°
FORKS
Dimensions120x35x1100 mm4,72x1,38x43,31 inches
TypeFEM2FEM2
OPTIONAL
White rubber trackYes
Side shifterConfiguration to be evaluated with technical departmentConfiguration to be evaluated with technical department
Hour meterYesYes
Telescopic forks (opened/closed)Configuration to be evaluated with technical departmentConfiguration to be evaluated with technical department
Towing hookYesYes
Additional hydraulic servicesConfiguration to be evaluated with technical departmentConfiguration to be evaluated with technical department

*Note: the dimensions and weight of the machine depend on the required configuration.